Taiwan NCC certification introduced
NCC is the Taiwan Communications Communications Commission (The National Communications Commission) referred to, mainly in the management of the Taiwan market and the use of communications information equipment:
1. LPE: Low Power Equipment is a low-power device (eg Bluetooth, WIFI)
2. TTE: Telecommunications Terminal Equipment is the communication terminal equipment (for example: mobile phone, flat panel equipment).
NCC certified product range
1. Low-power RF motors operating at 9 kHz to 300 GHz, such as wireless network (WLAN) products (including IEEE 802.11a / b / g), UNII, Bluetooth products, RFID, ZigBee, wireless keyboard, wireless mouse , Wireless headset microphone, radio walkie-talkie, radio remote control toys, all kinds of radio remote control, all kinds of wireless alarm, and so on.
2. Public switched telephone network equipment (PSTN) products, such as cable telephone (including VOIP network telephone), automatic alarm equipment, telephone answering machine, fax machine, remote control device, cable telephone wireless main machine, key telephone system , Data devices (including ADSL equipment), incoming display terminal equipment, 2.4GHz RF telecommunications terminal equipment.
3. Terrestrial mobile communication network equipment (PLMN) products such as wireless broadband access mobile station equipment (WiMAX mobile terminal equipment), GSM 900 / DCS 1800 mobile phone and terminal equipment (2G mobile phone), third generation mobile communication terminal Equipment (3G mobile phone) and so on.
NCC certification mark ratio statement
1. Should be the appropriate proportion of the size of the label or printed on the device body position, no maximum / minimum size requirements, to clarify the principle.
2. This NCC logo together with the examination of qualified numbers, should be attached to the product, the frequency of a single, should be clear and easy to identify.
An example of a test
In order to meet the needs of Taiwan's trade facilitation and customs clearance, the revised label design of the RF control equipment and telecommunication terminal equipment from January 1, 1995 is as follows: The low-power RF motor obtained from December 31, And wireless telecommunication terminal equipment, if you want to convert the test qualification number to the 95 year new encoding method (customs clearance code).
NCC certification process
1, the commissioner to provide product information to the organization to assess the offer;
2, the client to confirm the return receipt, fill out the application form, to provide samples, information, arrangements for the money (the first), institutions to open the case;
3, arrange product forecasts, and audit information;
4, such as testing, data problems, arrange rectification, retest, until qualified;
5, testing, data qualified, the issuing authority to witness the test;
6, witnessed the test is completed, the issuing authority issued a test report, and issued a certificate;
7, the principal to pay the money (the end of money), get the certificate report, closed case.
Apply for Taiwan NCC certification preparation information
1. Product circuit schematic;
2. Product block diagram
3. Product specifications;
4. Product brochure;
5. BOM;
6. Service application form;
7. Factory ISO9001 certificate;
8. Antenna specifications.
NCC certification application period
NCC certification application cycle 3-4 weeks, the cost can be determined according to product information.
NCC factory inspection and certificate validity period
NCC certification without factory inspection, the certificate is not valid, as long as the product has not changed, the test standard is not updated, the certificate is always effective.
Contrastive Analysis of Taiwan NCC Certification and BSMI Certification
staff-1